Rega RP-3 With ELYS2(Union Jack)

Overview

The RP3 has been designed and engineered to achieve outstanding performance way beyond the expectations of a product at this price point. Excellent build quality, reliability and ease of use combine to make a product which, if used correctly, will offer a lifetime of musical enjoyment. Omitting unnecessary gimmicks allows us to concentrate the manufacturing costs on the high quality parts necessary to reproduce records accurately. The RP3 is fitted with a brand new hand assembled RB303 tonearm, precision main bearing and a low vibration low noise 24v motor assembly which is individually hand tuned to its circuit to further reduce vibration.

Rega has pioneered the use of lightweight rigid plinths. Clever use of lightweight particulate core with a highly rigid phenolic resin skin became the foundations of the high level of performance achieved by the now iconic Planar turntable range. The RP3 takes this design philosophy to the next level. A super lightweight plinth combined with a phenolic resin double brace mounted specifically where the increased rigidity is required (between the tonearm mounting and the main hub bearing) forms a structurally sound "stressed beam" assembly. This rigid plinth design prevents energy absorption and unwanted resonances which will add unnatural distortions to the music. Equally, heavier mass can transfer more unwanted energy such as motor or bearing noise directly into the rotating record. The use of braces instead of the complete skin allows double thickness phenolic resin in these key areas while providing further weight reduction to the plinth which directly addresses the issue of mass absorption and unwanted energy transmission.

Rega RB303 Tonearm

Designed using the latest 3D CAD & CAM technology the new RB303 is the culmination of more than 30 years of tonearm design experience. Due to advances in technology we have been able to fine tune the iconic RB300 tonearm design. Featuring a brand new tube with increased rigidity to the bearing housing, arm carrier and headshell coupled with intelligent redistribution of mass ensure this arm will exhibit fewer points of possible resonance. Extreme stability with almost friction free movement from the high precision bearing assemblies guarantee to gather more information from your vinyl than ever before.

Rega Elys2 Cartridge

The Rega Elys 2 was specifically designed with the RB300 tone arm in mind and has a three point mounting system. The sound quality over the Bias is most apparent with the dynamics and separation between various musical instruments. The overall design makes it a perfect match for all Rega Turntables.

Rega entered the cartridge market in the early 80's. All cartridges are hand made by Rega utilizing custom coil winding techniques and ultra high precision moulded bodies. The Rega cartridge is a one piece moulding made of Pocan, a polymer with hardness greater than industrial aluminium.

Most cartridges loose high frequency energy by the movements generated in many joints created in conventional manufacturing. Most cartridges have five or six joints between the stylus mounting and the cartridge/head shell face. Rega cartridges have none! Most cartridges have to allow for large tolerances when manufacturing automatically with a reasonable gap of 0.7mm between the moving magnet and the pole pieces. This gap on Rega cartridges is only 0.25mm, much lower than any moving magnet cartridge we have tested.

Rega RP3 Key Features

- RB303 tonearm

- Double brace technology

- Light weight plinth design

- 24v low noise low vibration hand tuned motor assembly

- Elys 2 cartridge factory fitted

ความคิดเห็นของลูกค้า: